PartsTable
Technical Data Sheet
Download PDF

900-0125 — OVEN,ELECTRICAL-ELECTRONIC COMPO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

900-0125: OVEN,ELECTRICAL-ELECTRONIC COMPO.

OVEN,ELECTRICAL-ELECTRONIC COMPO. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 4.343 INCHES NOMINAL IN, overall_height: 3.812 INCHES NOMINAL IN, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 9.734 INCHES MINIMUM AND 9.766 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-250-0999, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
900-0125
NSN: 5340-00-250-0999
NIINs: 002500999, 007649759
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width4.343 INCHES NOMINAL IN
overall_height3.812 INCHES NOMINAL IN
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width9.734 INCHES MINIMUM AND 9.766 INCHES MAXIMUM IN
first_leg_length0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
second_leg_styleCORNER RADIUS
second_leg_width9.734 INCHES MINIMUM AND 9.766 INCHES MAXIMUM IN
special_features0.937 IN. LG,VOLTAGE RATING 115VAC,TEMP RANGE -3 TO 3 DEG C,TEMP INDICATING DEVICE-NOT INCLUDED,SGL PHASE VAC
style_designatorANGLE
second_leg_length0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
NSN5340-00-250-0999
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 900-0125 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.273 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.438 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.180 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG WIDTH: 9.734 INCHES MINIMUM AND 9.766 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
SECOND LEG SLOT WIDTH: 0.194 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.273 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.438 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.180 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG WIDTH9.734 INCHES MINIMUM AND 9.766 INCHES MAXIMUM IN
SECOND LEG LENGTH0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
SECOND LEG SLOT WIDTH0.194 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETHREE HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH4.859 INCHES MINIMUM AND 4.891 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 900-0125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 900-0125?
900-0125 is a OVEN,ELECTRICAL-ELECTRONIC COMPO.
What is the NSN for 900-0125?
900-0125 is cataloged in the U.S. Government catalog under NSN 5340-00-250-0999. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 900-0125

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.