PartsTable
Technical Data Sheet
PartsTable / O-RING / 90-8700-13920
90-8700-13920 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 1.711 INCHES NOMINAL IN, center_hole_diameter: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-470-6005, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90-8700-13920
NSN: 5331-00-470-6005
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter1.711 INCHES NOMINAL IN
center_hole_diameter1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-00-470-6005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 90-8700-13920 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.711 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
ELONGATION PERCENTAGE160 MAXIMUM
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.711 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
MS16Y20C301Interchangeable
interchangeable cross-reference
interchangeable
3920Interchangeable
interchangeable cross-reference
interchangeable
3110001000380Interchangeable
interchangeable cross-reference
interchangeable
09101896Interchangeable
interchangeable cross-reference
interchangeable
72-6970-974Interchangeable
interchangeable cross-reference
interchangeable
AM100Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 90-8700-13920?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90-8700-13920?
90-8700-13920 is a O-RING.
What parts can replace 90-8700-13920?
There are 27 known substitutes for 90-8700-13920: MS16Y20C301, 3920, 3110001000380 and 24 more. Substitute compatibility should be verified for your specific system.
Is 90-8700-13920 still available?
90-8700-13920 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90-8700-13920

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026