PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 90-444-1
90-444-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CABLE ASSEMBLY,RADIO FREQUENCY is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include material: COPPER FIRST POSITION TUBE CABLE, temp_rating: -25.0 CELSIUS AND 65.0 CELSIUS DEGC, hole_diameter: 0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.560 INCHES NOMINAL IN, aperture_width: 3.820 INCHES NOMINAL IN, conductor_form: SOLID SINGLE CONDUCTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-232-8843, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90-444-1
NSN: 5330-00-232-8843
FSC: 5330
CAGE: 05779 — PARKER-HANNIFIN CORPORATION DBA HYDRAULIC FILTER DIVISION DIV HYDRAULIC & FUEL FILTER DIVISION (USA)
SPECIFICATIONS
materialCOPPER FIRST POSITION TUBE CABLE
temp_rating-25.0 CELSIUS AND 65.0 CELSIUS DEGC
hole_diameter0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.560 INCHES NOMINAL IN
aperture_width3.820 INCHES NOMINAL IN
conductor_formSOLID SINGLE CONDUCTOR
overall_length2.540 INCHES IN
aperture_length4.510 INCHES NOMINAL IN
special_featuresEXPORT CONTROL; PRESHAPED CABLE
style_designatorNON-CIRCULAR
termination_typeCONNECTOR PLUG BOTH ENDS SINGLE CONDUCTOR
bolt_hole_quantity10
NSN5330-00-232-8843
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 90-444-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
INSIDE CORNER RADIUS: 0.180 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.180 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.401 INCHES MINIMUM AND 2.411 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 10
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+3341-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.412 INCHES MINIMUM AND 1.844 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
INSIDE CORNER RADIUS0.180 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.180 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.401 INCHES MINIMUM AND 2.411 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.688 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY10
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+3341-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.412 INCHES MINIMUM AND 1.844 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE WIDTH3.820 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
4441CInterchangeable
interchangeable cross-reference
interchangeable
4103C-2Interchangeable
interchangeable cross-reference
interchangeable
4441C-9Interchangeable
interchangeable cross-reference
interchangeable
4441Interchangeable
interchangeable cross-reference
interchangeable
7000031696Interchangeable
interchangeable cross-reference
interchangeable
8882CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 90-444-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90-444-1?
90-444-1 is a CABLE ASSEMBLY,RADIO FREQUENCY.
What parts can replace 90-444-1?
There are 9 known substitutes for 90-444-1: 4441C, 4103C-2, 4441C-9 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 90-444-1?
90-444-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-232-8843. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90-444-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026