90-003-2 — RESISTOR ASSEMBLY

✓ Government record, cited

Lexware · MRO · MRO_GENERAL

PRODUCT OVERVIEW

90-003-2: RESISTOR ASSEMBLY.

The RESISTOR ASSEMBLY is a Lexware industrial component. Key specifications include material: STEEL COMP 12L14 NUT, nut_style: CAP, nut_height: 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-222-4245, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 90-003-2

NSN: 5310-00-222-4245
NIINs: 002224245, 009088671, 010277497, 010325526, 013787541
FSC: 5310 — Nuts and Washers
CAGE: 97499 — BELL TEXTRON INC (USA)

SPECIFICATIONS

material	STEEL COMP 12L14 NUT
nut_style	CAP
nut_height	0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
temp_rating	250.0 FAHRENHEIT NOMINAL DEGF
thread_class	3B
thread_series	UNIFIED NATIONAL COARSE (UNC)
inclosure_type	FULLY INCLOSED
locking_feature	PREVAILING TORQUE WITH NONMETALLIC INSERT
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM CAP
width_across_flats	0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
nominal_thread_size	0.164 INCHES IN
NSN	5310-00-222-4245

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE CAP

•

THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)

•

TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

•

LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT

•

NUT HEIGHT: 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE CAP
THREAD SERIES	UNIFIED NATIONAL COARSE (UNC)
TEMP RATING	250.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
LOCKING FEATURE	PREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT	0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
SURFACE TREATMENT	CADMIUM NUT
SURFACE TREATMENT	CADMIUM CAP

SUBSTITUTES & CROSS-REFERENCES 4

8169821Reference document

Same NSN cross-reference

Reference document — Secondary reference

22K1-82Reference document

Same NSN cross-reference

Reference document — Secondary reference

10-0335Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

11014893-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 90-003-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 90-003-2?

90-003-2 is a RESISTOR ASSEMBLY manufactured by Lexware. It is classified as a MRO (MRO_GENERAL).

What parts can replace 90-003-2?

There are 4 known substitutes for 90-003-2: 8169821, 22K1-82, 10-0335 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 90-003-2?

90-003-2 is cataloged in the U.S. Government catalog under NSN 5310-00-222-4245. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

90-003-2 — RESISTOR ASSEMBLY

Request a Quote — 90-003-2