PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-914
9-914 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, body_width: 1.300 INCHES NOMINAL IN, head_angle: 15.0 DEGREES NOMINAL, body_height: 0.625 INCHES MAXIMUM IN, body_length: 2.700 INCHES NOMINAL IN, hole_diameter: 0.906 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-079-1574, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-914
NSN: 5310-00-079-1574
FSC: 5310
CAGE: 0W357 — PDI GROUND SUPPORT SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.300 INCHES NOMINAL IN
head_angle15.0 DEGREES NOMINAL
body_height0.625 INCHES MAXIMUM IN
body_length2.700 INCHES NOMINAL IN
hole_diameter0.906 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_height0.330 INCHES IN
overall_length190.0 MILLIMETERS NOMINAL MM
mounting_methodTHREADED HOLE(S) SINGLE GROUP
terminal_length0.118 INCHES IN
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
NSN5310-00-079-1574
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9-914 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1020 OVERALL
•
HOLE DIAMETER: 0.906 INCHES NOMINAL IN
•
STYLE DESIGNATOR: KEY
•
MATERIAL THICKNESS: 0.110 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
•
INTERNAL KEY QUANTITY: 1
•
INTERNAL STRAIGHT KEY WIDTH: 0.187 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY: 0.328 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.750 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020 OVERALL
HOLE DIAMETER0.906 INCHES NOMINAL IN
STYLE DESIGNATORKEY
MATERIAL THICKNESS0.110 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
INTERNAL KEY QUANTITY1
INTERNAL STRAIGHT KEY WIDTH0.187 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY0.328 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 COND CRCQ FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
48290Interchangeable
interchangeable cross-reference
interchangeable
108X187Interchangeable
interchangeable cross-reference
interchangeable
D15-427BPC88Interchangeable
interchangeable cross-reference
interchangeable
9914Interchangeable
interchangeable cross-reference
interchangeable
D15-427EPC88Interchangeable
interchangeable cross-reference
interchangeable
1203-94Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-914?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-914?
9-914 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 9-914?
There are 22 known substitutes for 9-914: 48290, 108X187, D15-427BPC88 and 19 more. Substitute compatibility should be verified for your specific system.
Is 9-914 still available?
9-914 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-914

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026