PartsTable
Technical Data Sheet
Download PDF

9-904-103568 — RETAINER,HELICAL COMPRESSION SPR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9-904-103568: RETAINER,HELICAL COMPRESSION SPR.

RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: STEEL, overall_height: 1.235 INCHES NOMINAL IN, flange_diameter: 3.124 INCHES NOMINAL IN, style_designator: IRREGULAR, body_inside_diameter: 2.388 INCHES NOMINAL IN, body_outside_diameter: 2.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-099-1427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-904-103568
NSN: 5340-01-099-1427
FSC: 5340 — Hardware, Commercial
CAGE: 12361 — GROVE U.S. LLC DBA GROVE US LLC (USA)
SPECIFICATIONS
materialSTEEL
overall_height1.235 INCHES NOMINAL IN
flange_diameter3.124 INCHES NOMINAL IN
style_designatorIRREGULAR
body_inside_diameter2.388 INCHES NOMINAL IN
body_outside_diameter2.500 INCHES NOMINAL IN
casehardening_indicatorNOT CASEHARDENED
end_item_identification2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
NSN5340-01-099-1427
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-904-103568 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 3.124 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: IRREGULAR
•
BODY INSIDE DIAMETER: 2.388 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER3.124 INCHES NOMINAL IN
OVERALL HEIGHT1.235 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
STYLE DESIGNATORIRREGULAR
BODY INSIDE DIAMETER2.388 INCHES NOMINAL IN
CASEHARDENING INDICATORNOT CASEHARDENED
END ITEM IDENTIFICATION2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR)
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
235959Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9-904-103568?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-904-103568?
9-904-103568 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 9-904-103568?
There is 1 known substitute for 9-904-103568: 235959. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-904-103568?
9-904-103568 is cataloged in the U.S. Government catalog under NSN 5340-01-099-1427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-904-103568