PartsTable
Technical Data Sheet
9-5459 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Snap function for quick and secure attachment to the filter thread of a lens<br>- Retaining cord for securing to a camera and lens. Key specifications include material: STEEL COMP 631 OVERALL, end_style: OFFSET HOOK, RIGHT ANGLE BOTH ENDS, design_type: CLOSED, hook_radius: 0.050 INCHES NOMINAL BOTH ENDS IN, coil_quantity: 13, opening_width: 0.320 INCHES NOMINAL BOTH ENDS IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-594-5407, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-5459
NSN: 5330-00-594-5407
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialSTEEL COMP 631 OVERALL
end_styleOFFSET HOOK, RIGHT ANGLE BOTH ENDS
design_typeCLOSED
hook_radius0.050 INCHES NOMINAL BOTH ENDS IN
coil_quantity13
opening_width0.320 INCHES NOMINAL BOTH ENDS IN
inside_diameter0.174 INCHES NOMINAL IN
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
style_designatorCYLINDRICAL
spring_free_length1.456 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate20.000 POUNDS PER INCH NOMINAL LBS
NSN5330-00-594-5407
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-5459 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
57541Interchangeable
interchangeable cross-reference
interchangeable
B28-20-5-5-8Interchangeable
interchangeable cross-reference
interchangeable
R645Interchangeable
interchangeable cross-reference
interchangeable
565013Interchangeable
interchangeable cross-reference
interchangeable
SK46969PC16-3Interchangeable
interchangeable cross-reference
interchangeable
3600-254REVAPCAN6227-41Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-5459?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-5459?
9-5459 is a HOSE ASSEMBLY,NONMETALLIC manufactured by Hama.
What parts can replace 9-5459?
There are 28 known substitutes for 9-5459: 57541, B28-20-5-5-8, R645 and 25 more. Substitute compatibility should be verified for your specific system.
Is 9-5459 still available?
9-5459 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-5459