PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-44512
9-44512 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

SCREWDRIVER ATTACHMENT,SOCKET WR. Key specifications include material: STEEL OVERALL, tip_width: 0.750 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, special_features: DRAG LINK TYPE; ONE PIECE CONSTRUCTION, style_designator: FLAT (SLOTTED), features_provided: MANUAL TOOL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-455-6884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-44512
NSN: 5315-00-455-6884
FSC: 5315
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
tip_width0.750 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
special_featuresDRAG LINK TYPE; ONE PIECE CONSTRUCTION
style_designatorFLAT (SLOTTED)
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.500 INCHES NOMINAL SINGLE END IN
wrenching_surface_shapeFLAT (SLOTTED) SINGLE END EXTERNAL
NSN5315-00-455-6884
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9-44512 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST HOLE DIAMETER: 0.172 INCHES NOMINAL IN
•
CHAMFER LENGTH: 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
DIAMETER: 0.747 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
HEAD STYLE: PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
•
UNDER HEAD LENGTH: 4.850 INCHES MINIMUM AND 4.910 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST HOLE DIAMETER0.172 INCHES NOMINAL IN
CHAMFER LENGTH0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
DIAMETER0.747 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
HEAD STYLEPAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
UNDER HEAD LENGTH4.850 INCHES MINIMUM AND 4.910 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.260 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
00944512000Interchangeable
interchangeable cross-reference
interchangeable
9-44512Interchangeable
interchangeable cross-reference
interchangeable
44512Interchangeable
interchangeable cross-reference
interchangeable
8438578Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-44512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-44512?
9-44512 is a SCREWDRIVER ATTACHMENT,SOCKET WR.
What parts can replace 9-44512?
There are 4 known substitutes for 9-44512: 00944512000, 9-44512, 44512 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-44512?
9-44512 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-455-6884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-44512

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026