PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-41248
9-41248 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SCREWDRIVER,FLAT TIP is a the manufacturer industrial component. Key specifications include width: 0.188 INCHES NOMINAL TIP IN, length: 8.000 INCHES NOMINAL BLADE IN, material: PLASTIC HANDLE, features_provided: STRAIGHT TIP SIDES AND STRAIGHT FLUTED HANDLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-588-4467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-41248
NSN: 5330-00-588-4467
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
width0.188 INCHES NOMINAL TIP IN
length8.000 INCHES NOMINAL BLADE IN
materialPLASTIC HANDLE
features_providedSTRAIGHT TIP SIDES AND STRAIGHT FLUTED HANDLE
NSN5330-00-588-4467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-41248 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
CROSS SECTION OUTSIDE DIAMETER: 2.701 INCHES NOMINAL IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS SECTION INSIDE DIAMETER: 2.200 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-20.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL SHAPE STYLESPECIAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
CROSS SECTION OUTSIDE DIAMETER2.701 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS SECTION INSIDE DIAMETER2.200 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
53248Interchangeable
interchangeable cross-reference
interchangeable
10148Interchangeable
interchangeable cross-reference
interchangeable
310-RTInterchangeable
interchangeable cross-reference
interchangeable
41248Interchangeable
interchangeable cross-reference
interchangeable
6B9497Interchangeable
interchangeable cross-reference
interchangeable
111-118Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-41248?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-41248?
9-41248 is a SCREWDRIVER,FLAT TIP.
What parts can replace 9-41248?
There are 10 known substitutes for 9-41248: 53248, 10148, 310-RT and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-41248?
9-41248 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-588-4467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-41248

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026