PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-2-9026-1
9-2-9026-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HOSE ASSEMBLY SET,METALLIC AND N. Key specifications include document_type: ENGINEERING DRAWING, document_source: 81337, special_features: HOSE LENGTH-47.5IN IN, end_item_identification: 5419-01-539-7182;EXPEDITIONARY SHOWER SYSTEM, component_document_origin: GOVERNMENT, part_name_assigned_by_controlling_agency: HOSE ASSEMBLY,SUPPLY,SHOWER,FRONT,COLD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-141-3847, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-2-9026-1
NSN: 5340-01-141-3847
FSC: 5340
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
document_source81337
special_featuresHOSE LENGTH-47.5IN IN
end_item_identification5419-01-539-7182;EXPEDITIONARY SHOWER SYSTEM
component_document_originGOVERNMENT
part_name_assigned_by_controlling_agencyHOSE ASSEMBLY,SUPPLY,SHOWER,FRONT,COLD
NSN5340-01-141-3847
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-2-9026-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG SLOT WIDTH: 0.218 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.420 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.125 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 0.870 INCHES NOMINAL IN
•
SECOND LEG SLOT WIDTH: 0.218 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: 2 SLOTS
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 6.250 INCHES NOMINAL IN
•
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 6.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG SLOT WIDTH0.218 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.420 INCHES NOMINAL IN
FIRST LEG THICKNESS0.125 INCHES NOMINAL IN
SECOND LEG WIDTH0.870 INCHES NOMINAL IN
SECOND LEG SLOT WIDTH0.218 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE2 SLOTS
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH6.250 INCHES NOMINAL IN
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH6.250 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
9-2-9026-1Interchangeable
interchangeable cross-reference
interchangeable
9-2-9026Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-2-9026-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-2-9026-1?
9-2-9026-1 is a HOSE ASSEMBLY SET,METALLIC AND N.
What parts can replace 9-2-9026-1?
There are 2 known substitutes for 9-2-9026-1: 9-2-9026-1, 9-2-9026. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-2-9026-1?
9-2-9026-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-141-3847. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-2-9026-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026