PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-2-6871 ITEM 8
9-2-6871 ITEM 8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL, construction: ONE-PIECE, overall_length: 8.600 INCHES MINIMUM AND 8.660 INCHES MAXIMUM IN, style_designator: STRIP, attachment_method: ROUND HOLE, cross-sectional_width: 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-705-5078, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-2-6871 ITEM 8
NSN: 5330-01-705-5078
FSC: 5330
CAGE: 81337 — W1D1 NATICK SOLDIER CENTER DBA US ARMY CCDC SOLDIER CENTER DIV COMBAT CAPABILITIES DEVELOPMENT COMMAND - SOLDIER CENTER (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
constructionONE-PIECE
overall_length8.600 INCHES MINIMUM AND 8.660 INCHES MAXIMUM IN
style_designatorSTRIP
attachment_methodROUND HOLE
cross-sectional_width0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
cross-sectional_height2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM IN
end_item_identification7360-01-686-0248
attachment_hole_diameter0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
attachment_feature_quantity42
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationASTM D4637 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-705-5078
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-2-6871 ITEM 8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
•
ATTACHMENT FEATURE QUANTITY: 42
•
CONSTRUCTION: ONE-PIECE
•
ATTACHMENT METHOD: ROUND HOLE
•
CROSS-SECTIONAL WIDTH: 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
ATTACHMENT HOLE DIAMETER: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
ATTACHMENT FEATURE QUANTITY42
CONSTRUCTIONONE-PIECE
ATTACHMENT METHODROUND HOLE
END ITEM IDENTIFICATION7360-01-686-0248
CROSS-SECTIONAL WIDTH0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
ATTACHMENT HOLE DIAMETER0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
OVERALL LENGTH8.600 INCHES MINIMUM AND 8.660 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
92687-1Interchangeable
interchangeable cross-reference
interchangeable
DISPOSABLE DIAMONDSInterchangeable
interchangeable cross-reference
interchangeable
F92E201Interchangeable
interchangeable cross-reference
interchangeable
55618Interchangeable
interchangeable cross-reference
interchangeable
LS 1020Interchangeable
interchangeable cross-reference
interchangeable
9-2-6871-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-2-6871 ITEM 8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-2-6871 ITEM 8?
9-2-6871 ITEM 8 is a SEAL,NONMETALLIC STRIP.
What parts can replace 9-2-6871 ITEM 8?
There are 7 known substitutes for 9-2-6871 ITEM 8: 92687-1, DISPOSABLE DIAMONDS, F92E201 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-2-6871 ITEM 8?
9-2-6871 ITEM 8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-705-5078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-2-6871 ITEM 8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026