PartsTable
Technical Data Sheet
Download PDF

9-158-50 — COIL,RADIO FREQUENCY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9-158-50: COIL,RADIO FREQUENCY.

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include height: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN, diameter: 0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, shell_type: SOLID, chamfer_length: 0.055 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-447-1290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-158-50
NSN: 5315-00-447-1290
NIINs: 004471290, 005818933, 010138363
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
height0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
diameter0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
shell_typeSOLID
chamfer_length0.055 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
shell_materialCOPPER ALLOY
insert_materialPLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS
contact_materialCOPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle45.0 DEGREES NOMINAL
NSN5315-00-447-1290
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9-158-50 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.055 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.212 INCHES MINIMUM AND 2.226 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
DIAMETER: 0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.055 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.212 INCHES MINIMUM AND 2.226 INCHES MAXIMUM IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.102 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
DIAMETER0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES 1
W1102AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 9-158-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-158-50?
9-158-50 is a COIL,RADIO FREQUENCY.
What parts can replace 9-158-50?
There is 1 known substitute for 9-158-50: W1102A. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-158-50?
9-158-50 is cataloged in the U.S. Government catalog under NSN 5315-00-447-1290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-158-50