PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-112-01-0002
9-112-01-0002 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: COPPER ALLOY OUTER LAYER, corner_shape: SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER, overall_length: 3.2380 INCHES MINIMUM AND 3.2400 INCHES MAXIMUM IN, style_designator: SEGMENTED, EXTERNAL FLANGES BOTH ENDS, left_flange_width: 0.1285 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN, right_flange_width: 0.1285 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-374-6166, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-112-01-0002
NSN: 3120-00-374-6166
FSC: 3120
CAGE: 00742 — AIR PRODUCTS & CHEMICALS, INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OUTER LAYER
corner_shapeSQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
overall_length3.2380 INCHES MINIMUM AND 3.2400 INCHES MAXIMUM IN
style_designatorSEGMENTED, EXTERNAL FLANGES BOTH ENDS
left_flange_width0.1285 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN
right_flange_width0.1285 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN
body_inside_diameter2.5020 INCHES MINIMUM AND 2.5040 INCHES MAXIMUM IN
body_outside_diameter2.9990 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM IN
left_flange_outside_diameter3.2450 INCHES MINIMUM AND 3.2550 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED CLOSED BOTH ENDS
right_flange_outside_diameter3.2450 INCHES MINIMUM AND 3.2550 INCHES MAXIMUM IN
surface_groove_location_and_quantity4 INTERNAL
NSN3120-00-374-6166
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 9-112-01-0002 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE RIGHT FLANGE BODY CORNER
•
SURFACE GROOVE LOCATION AND QUANTITY: 4 INTERNAL
•
MATERIAL: TIN ALLOY INNER LAYER
•
STYLE DESIGNATOR: SEGMENTED, EXTERNAL FLANGES BOTH ENDS
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE RIGHT FLANGE BODY CORNER
CORNER SHAPEROUND INSIDE LEFT CORNER
SURFACE GROOVE LOCATION AND QUANTITY4 INTERNAL
MATERIALTIN ALLOY INNER LAYER
MATERIALCOPPER ALLOY OUTER LAYER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
STYLE DESIGNATORSEGMENTED, EXTERNAL FLANGES BOTH ENDS
CORNER SHAPESQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
ANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
997-200HMInterchangeable
interchangeable cross-reference
interchangeable
11388-2Interchangeable
interchangeable cross-reference
interchangeable
6240001558707Interchangeable
interchangeable cross-reference
interchangeable
MS2531-1819Interchangeable
interchangeable cross-reference
interchangeable
1819Interchangeable
interchangeable cross-reference
interchangeable
8611340-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-112-01-0002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-112-01-0002?
9-112-01-0002 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 9-112-01-0002?
There are 10 known substitutes for 9-112-01-0002: 997-200HM, 11388-2, 6240001558707 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-112-01-0002?
9-112-01-0002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-374-6166. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-112-01-0002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026