PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9-10287
9-10287 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 2.185 INCHES MINIMUM AND 2.205 INCHES MAXIMUM IN, outside_diameter: 2.732 INCHES MINIMUM AND 2.752 INCHES MAXIMUM IN, material_thickness: 0.448 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN, outer_edge_thickness: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-4158, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-10287
NSN: 5330-00-359-4158
FSC: 5330
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter2.185 INCHES MINIMUM AND 2.205 INCHES MAXIMUM IN
outside_diameter2.732 INCHES MINIMUM AND 2.752 INCHES MAXIMUM IN
material_thickness0.448 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
outer_edge_thickness0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
cross-sectional_shape_styleOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
NSN5330-00-359-4158
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-10287 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.448 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 2.185 INCHES MINIMUM AND 2.205 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
•
OUTSIDE DIAMETER: 2.732 INCHES MINIMUM AND 2.752 INCHES MAXIMUM IN
•
MATERIAL: UNABLE TO DECODE
•
OUTER EDGE THICKNESS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
RING STYLE: CONCENTRIC
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.448 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
INSIDE DIAMETER2.185 INCHES MINIMUM AND 2.205 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
OUTSIDE DIAMETER2.732 INCHES MINIMUM AND 2.752 INCHES MAXIMUM IN
MATERIALUNABLE TO DECODE
OUTER EDGE THICKNESS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
RING STYLECONCENTRIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
10287Interchangeable
interchangeable cross-reference
interchangeable
951634-00Interchangeable
interchangeable cross-reference
interchangeable
951634PHInterchangeable
interchangeable cross-reference
interchangeable
RY151634Interchangeable
interchangeable cross-reference
interchangeable
62B21748Interchangeable
interchangeable cross-reference
interchangeable
MX-3680/AICInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-10287?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-10287?
9-10287 is a RING,WIPER.
What parts can replace 9-10287?
There are 14 known substitutes for 9-10287: 10287, 951634-00, 951634PH and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-10287?
9-10287 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-4158. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-10287

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026