PartsTable
Technical Data Sheet
Download PDF

9-10-C106 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9-10-C106: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.536 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-375-7163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-10-C106
NSN: 5310-01-375-7163
FSC: 5310 — Nuts and Washers
CAGE: 0W357 — PDI GROUND SUPPORT SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.536 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND ZINC OVERALL
width_across_flats1.443 INCHES MINIMUM AND 1.463 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
hole_type_and_quantity6 DRILLED
NSN5310-01-375-7163
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9-10-C106 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.443 INCHES MINIMUM AND 1.463 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION A
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
NUT HEIGHT: 0.536 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
DRILLED HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND ZINC OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.443 INCHES MINIMUM AND 1.463 INCHES MAXIMUM IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION A
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
NUT HEIGHT0.536 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND ZINC OVERALL
NUT STYLESLOTTED, HEXAGON
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9-10-C106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-10-C106?
9-10-C106 is a NUT,PLAIN,SLOTTED,HEXAGON.
What is the NSN for 9-10-C106?
9-10-C106 is cataloged in the U.S. Government catalog under NSN 5310-01-375-7163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-10-C106

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.