PartsTable
Technical Data Sheet
Download PDF

9-1-0513 — VALVE,GATE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9-1-0513: VALVE,GATE.

The VALVE,GATE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY DISK, stem_type: NONRISING, valve_size: 1.500 INCHES IN, bonnet_type: INSIDE SCREW, hole_diameter: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_height: 6.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-833-1428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-1-0513
NSN: 5331-00-833-1428
NIINs: 008331428, 014375569, 014695814
FSC: 5331 — O-ring
CAGE: 14561 — MAGNATROL VALVE CORP DIV CLARK-COOPER (USA)
SPECIFICATIONS
materialCOPPER ALLOY DISK
stem_typeNONRISING
valve_size1.500 INCHES IN
bonnet_typeINSIDE SCREW
hole_diameter0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_height6.000 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
pressure_classERR-060
connection_typeTHREADED INTERNAL PIPE
outside_diameter42.000 INCHES NOMINAL IN
special_featuresALTERNATE MATERIAL IS WOVEN CERAMIC FIBER CLOTH, INCONEL WIRE REINFORCED. 1/8 TO 1/4 INCH THICK. SUITABLE FOR TEMPERATURES ABOVE 1050 DEG F. IN
style_designatorCIRCULAR
NSN5331-00-833-1428
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-1-0513 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.54 INCHES MINIMUM AND 2.69 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.342 INCHES MINIMUM AND 2.382 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.54 INCHES MINIMUM AND 2.69 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.342 INCHES MINIMUM AND 2.382 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
120470Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
609285-05Reference document
Same NSN cross-reference
Reference document — Secondary reference
6089285-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
199821Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N304-75-142Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SR 832-75-142Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 9-1-0513?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-1-0513?
9-1-0513 is a VALVE,GATE.
What parts can replace 9-1-0513?
There are 10 known substitutes for 9-1-0513: 120470, 609285-05, 6089285-5 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-1-0513?
9-1-0513 is cataloged in the U.S. Government catalog under NSN 5331-00-833-1428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-1-0513