PartsTable
Technical Data Sheet
Download PDF

9-09572010-0 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9-09572010-0: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 19.000 MILLIMETERS NOMINAL MM, retainer_thickness: 2.000 MILLIMETERS NOMINAL MM, packing_ring_thickness: 3.0 MILLIMETERS NOMINAL MM, packing_inside_diameter: 10.500 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-361-7912, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9-09572010-0
NSN: 5330-01-361-7912
FSC: 5330 — Packing and Gasket Materials
CAGE: J1165 — ISUZU MOTORS LIMITED (JPN)
SPECIFICATIONS
materialSTEEL RETAINER
constructionONE-PIECE
outside_diameter19.000 MILLIMETERS NOMINAL MM
retainer_thickness2.000 MILLIMETERS NOMINAL MM
packing_ring_thickness3.0 MILLIMETERS NOMINAL MM
packing_inside_diameter10.500 MILLIMETERS NOMINAL MM
cross-sectional_shape_styleSPECIAL
NSN5330-01-361-7912
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9-09572010-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING THICKNESS: 3.0 MILLIMETERS NOMINAL MM
•
PACKING INSIDE DIAMETER: 10.500 MILLIMETERS NOMINAL MM
•
OUTSIDE DIAMETER: 19.000 MILLIMETERS NOMINAL MM
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
RETAINER THICKNESS: 2.000 MILLIMETERS NOMINAL MM
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
PACKING RING THICKNESS3.0 MILLIMETERS NOMINAL MM
PACKING INSIDE DIAMETER10.500 MILLIMETERS NOMINAL MM
OUTSIDE DIAMETER19.000 MILLIMETERS NOMINAL MM
CROSS-SECTIONAL SHAPE STYLESPECIAL
RETAINER THICKNESS2.000 MILLIMETERS NOMINAL MM
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL RETAINER
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
1330028Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9-09572010-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-09572010-0?
9-09572010-0 is a PACKING WITH RETAINER.
What parts can replace 9-09572010-0?
There is 1 known substitute for 9-09572010-0: 1330028. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-09572010-0?
9-09572010-0 is cataloged in the U.S. Government catalog under NSN 5330-01-361-7912. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-09572010-0

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.