PartsTable
Technical Data Sheet
PartsTable / MRO / 9-00334
9-00334 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include material: PLASTIC BODY, nut_style: PLATE, body_style: TOP MOUNT, nut_height: 0.365 INCHES MAXIMUM IN, nut_length: 0.917 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-677-0124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9-00334
NSN: 5310-00-677-0124
FSC: 5310
CAGE: 97499 — BELL TEXTRON INC (USA)
SPECIFICATIONS
materialPLASTIC BODY
nut_stylePLATE
body_styleTOP MOUNT
nut_height0.365 INCHES MAXIMUM IN
nut_length0.917 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
temp_rating225.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
overall_width0.750 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.530 INCHES NOMINAL IN
overall_length1.184 INCHES NOMINAL IN
NSN5310-00-677-0124
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9-00334 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERBORE DIAMETER: 0.300 INCHES MINIMUM NUT IN
•
MATERIAL: ALUMINUM ALLOY BASE
•
NUT MOUNTING PROVISION: STRAIGHT HOLES
•
LUBRICATION: DRY FILM LUBRICANT
•
NUT HEIGHT: 0.365 INCHES MAXIMUM IN
•
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM SHELL
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERBORE DIAMETER0.300 INCHES MINIMUM NUT IN
MATERIALALUMINUM ALLOY BASE
NUT MOUNTING PROVISIONSTRAIGHT HOLES
LUBRICATIONDRY FILM LUBRICANT
NUT HEIGHT0.365 INCHES MAXIMUM IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM SHELL
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
NUT COUNTERBORE DEPTH0.135 INCHES NOMINAL NUT IN
SURFACE TREATMENTCADMIUM BOTH ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
27E213Interchangeable
interchangeable cross-reference
interchangeable
415-0460-005Interchangeable
interchangeable cross-reference
interchangeable
900334Interchangeable
interchangeable cross-reference
interchangeable
24591Interchangeable
interchangeable cross-reference
interchangeable
14650H048Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9-00334?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9-00334?
9-00334 is a SOCKET,PLUG-IN ELECTRONIC COMPON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9-00334?
There are 5 known substitutes for 9-00334: 27E213, 415-0460-005, 900334 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9-00334?
9-00334 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-677-0124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9-00334

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026