PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8Z1136PC13
8Z1136PC13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, mounting_pad: NOT INCLUDED, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 1.250 INCHES NOMINAL IN, style_designator: CURVED ARCH, surface_treatment: CADMIUM OR ZINC AND CHROMATE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-252-4372, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8Z1136PC13
NSN: 5340-00-252-4372
FSC: 5340
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 1017 OR STEEL COMP 1015 OR STEEL COMP 1012 OR STEEL COMP 1010 OR STEEL COMP 1009 OR STEEL COMP 1008 OR STEEL COMP 1006 OR STEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.625 INCHES NOMINAL IN
overall_length1.250 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM OR ZINC AND CHROMATE
material_thickness0.062 INCHES NOMINAL IN
mounting_hole_size0.218 INCHES NOMINAL IN
inside_diameter/arch_length0.405 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.406 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.578 INCHES NOMINAL IN
NSN5340-00-252-4372
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8Z1136PC13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: ZINC
•
MATERIAL THICKNESS: 0.094 INCHES NOMINAL IN
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.300 INCHES NOMINAL IN
•
MOUNTING HOLE SIZE: 0.2010 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.400 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCURVED ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTZINC
MATERIAL THICKNESS0.094 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.300 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.2010 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.400 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
OVERALL LENGTH1.093 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
MS35140-5Upgraded Successor
successor cross-reference
successor
MS35150-5Upgraded Successor
successor cross-reference
successor
FF-S-760AUpgraded Successor
successor cross-reference
successor
8Z1136-13Interchangeable
Same NIIN cross-reference
interchangeable
165854PC8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8Z1136PC13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8Z1136PC13?
8Z1136PC13 is a STRAP,RETAINING.
What parts can replace 8Z1136PC13?
There are 5 known substitutes for 8Z1136PC13: MS35140-5, MS35150-5, FF-S-760A and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8Z1136PC13?
8Z1136PC13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-252-4372. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8Z1136PC13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026