PartsTable
Technical Data Sheet
Download PDF

8Z1000PC40 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

8Z1000PC40: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: OVAL COUNTERSUNK, thread_class: 3A A, head_diameter: 0.824 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN, thread_length: 0.625 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.908 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-272-1680, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8Z1000PC40
NSN: 5305-00-272-1680
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
head_styleOVAL COUNTERSUNK
thread_class3A A
head_diameter0.824 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
thread_length0.625 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.908 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle60.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.500 INCHES IN
thread_quantity_per_inch13
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-272-1680
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8Z1000PC40 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.908 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 46S17D CL 1 FSCM 10001 MFR REF SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.625 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: OVAL COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.908 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION46S17D CL 1 FSCM 10001 MFR REF SINGLE MATERIAL RESPONSE
THREAD LENGTH0.625 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEOVAL COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE60.0 DEGREES NOMINAL
THREAD CLASS3A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
213561-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8Z1000PC40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8Z1000PC40?
8Z1000PC40 is a SCREW,MACHINE.
What parts can replace 8Z1000PC40?
There is 1 known substitute for 8Z1000PC40: 213561-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 8Z1000PC40?
8Z1000PC40 is cataloged in the U.S. Government catalog under NSN 5305-00-272-1680. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8Z1000PC40