PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8N6710
8N6710 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL, hole_diameter: 0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.040 INCHES NOMINAL IN, overall_length: 23.460 INCHES NOMINAL IN, cross-sectional_thickness: 0.030 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-354-1040, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8N6710
NSN: 5330-00-354-1040
FSC: 5330
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL
hole_diameter0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.040 INCHES NOMINAL IN
overall_length23.460 INCHES NOMINAL IN
cross-sectional_thickness0.030 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-354-1040
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8N6710 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL
•
HOLE DIAMETER: 0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CHLOROPRENE CLASS CR AND ASBESTOS OVERALL
OVERALL LENGTH23.460 INCHES NOMINAL IN
HOLE DIAMETER0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH7.040 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.030 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
33154Interchangeable
interchangeable cross-reference
interchangeable
9060Interchangeable
interchangeable cross-reference
interchangeable
50012Interchangeable
interchangeable cross-reference
interchangeable
20507Interchangeable
interchangeable cross-reference
interchangeable
1881804Interchangeable
interchangeable cross-reference
interchangeable
4026109Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8N6710?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8N6710?
8N6710 is a GASKET.
What parts can replace 8N6710?
There are 15 known substitutes for 8N6710: 33154, 9060, 50012 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8N6710?
8N6710 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-354-1040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8N6710

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026