PartsTable
Technical Data Sheet
Download PDF

8N09 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8N09: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 2.5313 INCHES NOMINAL IN, nut_thickness: 0.437 INCHES NOMINAL IN, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-185-6531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8N09
NSN: 5310-00-185-6531
FSC: 5310 — Nuts and Washers
CAGE: 79568 — WHITTET-HIGGINS COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter2.5313 INCHES NOMINAL IN
nut_thickness0.437 INCHES NOMINAL IN
thread_seriesUN
thread_directionRIGHT-HAND
drive_point_depth0.0937 INCHES NOMINAL IN
drive_point_width0.250 INCHES NOMINAL IN
nominal_thread_size1.767 INCHES IN
drive_point_quantity8
thread_pitch_diameters+1.7309 TO 1.7354 INCHES IN
thread_quantity_per_inch18
NSN5310-00-185-6531
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8N09 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
THREAD PITCH DIAMETERS: +1.7309 TO 1.7354 INCHES IN
•
DRIVE POINT WIDTH: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.767 INCHES IN
•
NUT DIAMETER: 2.5313 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.0937 INCHES NOMINAL IN
•
NUT THICKNESS: 0.437 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
THREAD PITCH DIAMETERS+1.7309 TO 1.7354 INCHES IN
DRIVE POINT WIDTH0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.767 INCHES IN
NUT DIAMETER2.5313 INCHES NOMINAL IN
DRIVE POINT DEPTH0.0937 INCHES NOMINAL IN
NUT THICKNESS0.437 INCHES NOMINAL IN
DRIVE POINT QUANTITY8
NUT STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 1
PN09Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8N09?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8N09?
8N09 is a NUT,PLAIN,ROUND.
What parts can replace 8N09?
There is 1 known substitute for 8N09: PN09. Substitute compatibility should be verified for your specific system.
What is the NSN for 8N09?
8N09 is cataloged in the U.S. Government catalog under NSN 5310-00-185-6531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8N09

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.