PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8HN
8HN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.046 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-890-4717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8HN
NSN: 5340-00-890-4717
FSC: 5340
CAGE: 26863 — ALL-STATES INC. (USA)
SPECIFICATIONS
diameter0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.046 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
loop_inside_diameter0.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES MINIMUM AND 0.607 INCHES MAXIMUM IN
NSN5340-00-890-4717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8HN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES MINIMUM AND 0.607 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES MINIMUM AND 0.607 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
L1004-28VInterchangeable
interchangeable cross-reference
interchangeable
MS25237-327Interchangeable
interchangeable cross-reference
interchangeable
L1004Interchangeable
interchangeable cross-reference
interchangeable
89-352Interchangeable
interchangeable cross-reference
interchangeable
A-A-50961 TY 1 CL B STYL 1 SZ 12Interchangeable
interchangeable cross-reference
interchangeable
12HTRANSISTORInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8HN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8HN?
8HN is a CLAMP,LOOP.
What parts can replace 8HN?
There are 15 known substitutes for 8HN: L1004-28V, MS25237-327, L1004 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8HN?
8HN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-890-4717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8HN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026