PartsTable
Technical Data Sheet
Download PDF

8D6787 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8D6787: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 23.250 INCHES NOMINAL IN, first_leg_length: 2.000 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-168-3998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8D6787
NSN: 5340-01-168-3998
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width23.250 INCHES NOMINAL IN
first_leg_length2.000 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width23.250 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length3.000 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.188 INCHES NOMINAL IN
first_leg_slot_width0.562 INCHES NOMINAL IN
NSN5340-01-168-3998
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8D6787 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.000 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 14.500 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG WIDTH: 23.250 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 3.000 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: 2 SLOTS
•
STYLE DESIGNATOR: ANGLE
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.000 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH14.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG WIDTH23.250 INCHES NOMINAL IN
SECOND LEG LENGTH3.000 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLE2 SLOTS
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATION1E357,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE
SUBSTITUTES & CROSS-REFERENCES 1
C-52-11246-5200 1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8D6787?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8D6787?
8D6787 is a BRACKET,ANGLE.
What parts can replace 8D6787?
There is 1 known substitute for 8D6787: C-52-11246-5200 1. Substitute compatibility should be verified for your specific system.
What is the NSN for 8D6787?
8D6787 is cataloged in the U.S. Government catalog under NSN 5340-01-168-3998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8D6787

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.