The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, inner_ring_width: 1.2500 INCHES NOMINAL IN, outer_ring_width: 1.1900 INCHES NOMINAL IN, bearing_seal_type: CONTACT, surface_treatment: CADMIUM OR OXIDE INNER RING. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-338-2755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E52100 OR STEEL COMP E51100 ROLLER |
| bore_diameter | 0.5000 INCHES NOMINAL IN |
| seal_quantity | 2 |
| alignment_type | RIGID |
| inner_ring_width | 1.2500 INCHES NOMINAL IN |
| outer_ring_width | 1.1900 INCHES NOMINAL IN |
| bearing_seal_type | CONTACT |
| surface_treatment | CADMIUM OR OXIDE INNER RING |
| lubrication_material | GREASE |
| NSN | 3110-01-338-2755 |
| SURFACE TREATMENT | CADMIUM END PLATE |
| BORE DIAMETER | 0.5000 INCHES NOMINAL IN |
| ALIGNMENT TYPE | RIGID |
| INNER RING WIDTH | 1.2500 INCHES NOMINAL IN |
| BEARING SEAL TYPE | CONTACT |
| OUTER RING WIDTH | 1.1900 INCHES NOMINAL IN |
| SPECIAL FEATURES | OIL HOLES AND OIL GROOVE IN INNER RING,NO OIL HOLES OR OIL GROOVE IN OUTER RING;LUBRICATING SPEC FOR LUBRICATING MATERIAL:MIL-G-81322;BEARING NEEDLE STYLE:NO. 432 IN OLD FIIG A04400;ROLLER OD;1.3550 IN. NOM.;AFBMA STANDARD TOLERANCE DESIGNATION:AFBMA STANDARD TOLERANCE FOR AIRPLANE NEEDLE BEARINGS;ROLLER ELEMENT GROOVE QTY:2;RING ALIGNING:NOT INCLUDED;OTHER MATERIAL FOR END PLATES ARE STEEL,QQ-S-700 OR STEEL,ASTM A304,A322 AND A331;OTHER MATERIAL FOR INNER RINGS,OUTER RINGS AND ROLLERS ARE THE SAME AS THE END PLATES;OTHER MATERIAL FOR THE SEALS ARE:PLASTIC,POLYAMIDE,L-P-410,TYPE 6/6,OR PLASTIC,ACETAL RESIN,L-P-392,OR PLASTIC,POLYESTER ELASTOMER IN |
| SEAL QUANTITY | 2 |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL | STEEL COMP 4615 OR STEEL COMP 4617 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E50100 OR STEEL COMP E52100 OR STEEL COMP E51100 END PLATE |