PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8AG2010
8AG2010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: COPPER ALLOY, design_type: SOLID, end_diameter: 1.3750 INCHES NOMINAL IN, bore_diameter: 1.1250 INCHES NOMINAL IN, overall_height: 0.3750 INCHES NOMINAL IN, style_designator: SEAT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-836-9405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8AG2010
NSN: 5340-00-836-9405
FSC: 5340
CAGE: 13829 — PARKER HANNIFIN CORPORATION DIV CYLINDER DIVISION (USA)
SPECIFICATIONS
materialCOPPER ALLOY
design_typeSOLID
end_diameter1.3750 INCHES NOMINAL IN
bore_diameter1.1250 INCHES NOMINAL IN
overall_height0.3750 INCHES NOMINAL IN
style_designatorSEAT
first_step_diameter1.7500 INCHES NOMINAL IN
counterbore_diameter1.3750 INCHES NOMINAL IN
distance_from_end_to_first_step0.1875 INCHES NOMINAL IN
NSN5340-00-836-9405
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8AG2010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERBORE DIAMETER: 1.3750 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
END DIAMETER: 1.3750 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.1875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SEAT
•
MATERIAL: COPPER ALLOY
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERBORE DIAMETER1.3750 INCHES NOMINAL IN
DESIGN TYPESOLID
END DIAMETER1.3750 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.1875 INCHES NOMINAL IN
STYLE DESIGNATORSEAT
MATERIALCOPPER ALLOY
OVERALL HEIGHT0.3750 INCHES NOMINAL IN
BORE DIAMETER1.1250 INCHES NOMINAL IN
FIRST STEP DIAMETER1.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
16384Interchangeable
interchangeable cross-reference
interchangeable
380GX10Interchangeable
interchangeable cross-reference
interchangeable
65500 CODE 40395Interchangeable
interchangeable cross-reference
interchangeable
MP1121Interchangeable
interchangeable cross-reference
interchangeable
609050Interchangeable
interchangeable cross-reference
interchangeable
P1121Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8AG2010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8AG2010?
8AG2010 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace 8AG2010?
There are 8 known substitutes for 8AG2010: 16384, 380GX10, 65500 CODE 40395 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8AG2010?
8AG2010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-836-9405. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8AG2010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026