PartsTable
Technical Data Sheet
Download PDF

89HM1574-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

89HM1574-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: STEEL COMP 4340 OVERALL, fork_depth: 2.437 INCHES NOMINAL IN, angle_height: 0.625 INCHES NOMINAL IN, shank_length: 2.125 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-373-7747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
89HM1574-1
NSN: 5340-00-373-7747
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialSTEEL COMP 4340 OVERALL
fork_depth2.437 INCHES NOMINAL IN
angle_height0.625 INCHES NOMINAL IN
shank_length2.125 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.749 INCHES MINIMUM AND 0.751 INCHES MAXIMUM IN
overall_width1.937 INCHES NOMINAL IN
thread_length1.438 INCHES NOMINAL ROD CONNECTION IN
overall_height2.250 INCHES NOMINAL IN
shank_diameter1.741 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
fork_span_width1.049 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN
NSN5340-00-373-7747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 89HM1574-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.741 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 1.049 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.881 INCHES MINIMUM AND 0.888 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.438 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 2.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.741 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
OVERALL HEIGHT2.250 INCHES NOMINAL IN
FORK SPAN WIDTH1.049 INCHES MINIMUM AND 1.056 INCHES MAXIMUM IN
FORK ARM THICKNESS0.881 INCHES MINIMUM AND 0.888 INCHES MAXIMUM IN
THREAD LENGTH1.438 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH2.125 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.937 INCHES NOMINAL IN
ANGLE45.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 89HM1574-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 89HM1574-1?
89HM1574-1 is a CLEVIS,ROD END.
What is the NSN for 89HM1574-1?
89HM1574-1 is cataloged in the U.S. Government catalog under NSN 5340-00-373-7747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 89HM1574-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.