PartsTable
Technical Data Sheet
Download PDF

8995-7 — SCREW,TAPPING

✓ Government record, cited
InLine · BOLT SCREW
PRODUCT OVERVIEW

8995-7: SCREW,TAPPING.

- 4pin mini DIN plug to 4pin mini DIN jack - Lenght: 20m. Key specifications include material: STEEL COMP 1016 OVERALL, head_style: ROUND EXTENDED WASHER, head_height: 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN, head_diameter: 0.338 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, special_features: FURNISHED WITH ONE NEUTRAL COLORED NYLON WASHER. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-246-6413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8995-7
NSN: 5305-00-246-6413
FSC: 5305 — Screws
CAGE: 85005 — INGERSOLL PRODUCTS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1016 OVERALL
head_styleROUND EXTENDED WASHER
head_height0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
head_diameter0.338 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
special_featuresFURNISHED WITH ONE NEUTRAL COLORED NYLON WASHER
surface_treatmentNICKEL OVERALL
internal_drive_styleCROSS RECESS TYPE II
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
extended_washer_diameter0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
extended_washer_thickness0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
nonmachine_nominal_thread_diameter0.190 INCHES IN
NSN5305-00-246-6413
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8995-7 · InLine ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
EXTENDED WASHER THICKNESS: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
EXTENDED WASHER DIAMETER: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD STYLE: ROUND EXTENDED WASHER
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
EXTENDED WASHER THICKNESS0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
HEAD HEIGHT0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
EXTENDED WASHER DIAMETER0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD STYLEROUND EXTENDED WASHER
SPECIAL FEATURESFURNISHED WITH ONE NEUTRAL COLORED NYLON WASHER
SURFACE TREATMENTNICKEL OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE II
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
7224979-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
HW105Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8995-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8995-7?
8995-7 is a SCREW,TAPPING manufactured by InLine.
What parts can replace 8995-7?
There are 2 known substitutes for 8995-7: 7224979-2, HW105. Substitute compatibility should be verified for your specific system.
What is the NSN for 8995-7?
8995-7 is cataloged in the U.S. Government catalog under NSN 5305-00-246-6413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8995-7