PartsTable
Technical Data Sheet
Download PDF

89585A3 — TIP,FURNITURE LEG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

89585A3: TIP,FURNITURE LEG.

The TIP,FURNITURE LEG is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, overall_length: 0.8125 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), overall_diameter: 0.75 INCHES NOMINAL IN, special_features: ITEM HAS A SWIVEL THAT ALLOWS THE NUT TO TILT UP TO 10 DEGREES., thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-612-7364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
89585A3
NSN: 5340-01-612-7364
FSC: 5340 — Hardware, Commercial
CAGE: 0KVE6 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
overall_length0.8125 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
overall_diameter0.75 INCHES NOMINAL IN
special_featuresITEM HAS A SWIVEL THAT ALLOWS THE NUT TO TILT UP TO 10 DEGREES.
thread_directionRIGHT-HAND
nominal_thread_size0.375 INCHES IN
thread_quantity_per_inch16
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity1
part_name_assigned_by_controlling_agencySWIVEL PAD
NSN5340-01-612-7364
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 89585A3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 1
•
OVERALL DIAMETER: 0.75 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY1
OVERALL DIAMETER0.75 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
OVERALL LENGTH0.8125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
SPECIAL FEATURESITEM HAS A SWIVEL THAT ALLOWS THE NUT TO TILT UP TO 10 DEGREES.
PART NAME ASSIGNED BY CONTROLLING AGENCYSWIVEL PAD
THREAD QUANTITY PER INCH16
MATERIALSTEEL COMP 303 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 89585A3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 89585A3?
89585A3 is a TIP,FURNITURE LEG.
What is the NSN for 89585A3?
89585A3 is cataloged in the U.S. Government catalog under NSN 5340-01-612-7364. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 89585A3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.