PartsTable
Technical Data Sheet
Download PDF

8954-004-148 — LEVER,MANUAL CONTROL

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

8954-004-148: LEVER,MANUAL CONTROL.

The LEVER,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: STEEL, seat_angle: 45.0 DEGREES NOMINAL, taper_length: 3.438 INCHES NOMINAL IN, overall_height: 3.840 INCHES NOMINAL IN, style_designator: SOLID WEDGE, taper_major_diameter: 2.381 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-265-5010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8954-004-148
NSN: 4820-01-265-5010
FSC: 4820 — Valves, Nonpowered
CAGE: 57574 — VELAN VALVE CORP. (USA)
SPECIFICATIONS
materialSTEEL
seat_angle45.0 DEGREES NOMINAL
taper_length3.438 INCHES NOMINAL IN
overall_height3.840 INCHES NOMINAL IN
style_designatorSOLID WEDGE
taper_major_diameter2.381 INCHES NOMINAL IN
taper_minor_diameter1.500 INCHES NOMINAL IN
NSN4820-01-265-5010
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 8954-004-148 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TAPER MINOR DIAMETER: 1.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SOLID WEDGE
•
TAPER MAJOR DIAMETER: 2.381 INCHES NOMINAL IN
•
SEAT ANGLE: 45.0 DEGREES NOMINAL
•
TAPER LENGTH: 3.438 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT3.840 INCHES NOMINAL IN
TAPER MINOR DIAMETER1.500 INCHES NOMINAL IN
STYLE DESIGNATORSOLID WEDGE
TAPER MAJOR DIAMETER2.381 INCHES NOMINAL IN
SEAT ANGLE45.0 DEGREES NOMINAL
TAPER LENGTH3.438 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
8340-15Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8954-004-148?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8954-004-148?
8954-004-148 is a LEVER,MANUAL CONTROL.
What parts can replace 8954-004-148?
There is 1 known substitute for 8954-004-148: 8340-15. Substitute compatibility should be verified for your specific system.
What is the NSN for 8954-004-148?
8954-004-148 is cataloged in the U.S. Government catalog under NSN 4820-01-265-5010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8954-004-148

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.