PartsTable
Technical Data Sheet
Download PDF

8945612-41 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

8945612-41: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.047 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.438 INCHES MAXIMUM IN, screw_material: STEEL COMP 303, fastener_length: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-958-2748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8945612-41
NSN: 5305-00-958-2748
FSC: 5305 — Screws
CAGE: 11447 — L3 TECHNOLOGIES, INC. DIV COMMUNICATION SYSTEMS-EAST (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.047 INCHES NOMINAL IN
thread_class2A A
thread_length0.438 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303
fastener_length0.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.310 INCHES NOMINAL IN
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-958-2748
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8945612-41 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.047 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.438 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.047 INCHES NOMINAL IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.438 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.438 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.310 INCHES NOMINAL IN
SCREW MATERIALSTEEL COMP 303
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
NCS8-2-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
58S(0.062)-ST-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8945612-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8945612-41?
8945612-41 is a SCREW,MACHINE.
What parts can replace 8945612-41?
There are 2 known substitutes for 8945612-41: NCS8-2-14, 58S(0.062)-ST-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 8945612-41?
8945612-41 is cataloged in the U.S. Government catalog under NSN 5305-00-958-2748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8945612-41