PartsTable
Technical Data Sheet
Download PDF

894365-674-2 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

894365-674-2: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include style_designator: NON-CIRCULAR, end_item_identification: TMSS-LRG-EDFP, part_name_assigned_by_controlling_agency: GASKET,THERMOSTAT(4JG1). This part is cataloged in the U.S.

Government catalog under NSN 5330-01-480-0823, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
894365-674-2
NSN: 5330-01-480-0823
NIINs: 014800823, 015587326
FSC: 5330 — Packing and Gasket Materials
CAGE: 3FX22 — NORTHEAST ISUZU ENGINES, INC DBA NORPRO (USA)
SPECIFICATIONS
style_designatorNON-CIRCULAR
end_item_identificationTMSS-LRG-EDFP
part_name_assigned_by_controlling_agencyGASKET,THERMOSTAT(4JG1)
NSN5330-01-480-0823
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 894365-674-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SIDE RADIUS FROM BOLT CIRCLE: 32.0 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 49.0 MILLIMETERS NOMINAL MM
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 74.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
SIDE RADIUS FROM BOLT CIRCLE32.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-CIRCULAR
OVERALL WIDTH92.0 MILLIMETERS NOMINAL MM
APERTURE DIAMETER49.0 MILLIMETERS NOMINAL MM
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER74.0 MILLIMETERS NOMINAL MM
PART NAME ASSIGNED BY CONTROLLING AGENCYGASKET;OUTLET PIPE TO T/HSG
END ITEM IDENTIFICATIONGENERATING PLANT;OXYGEN-NITROGEN,SEM
OUTSIDE CORNER RADIUS9.0 MILLIMETERS NOMINAL MM
HOLE DIAMETER8.5 MILLIMETERS NOMINAL LOCATION NOT OTHERWISE SPECIFIED MM
SUBSTITUTES & CROSS-REFERENCES 1
894365-6741Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 894365-674-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 894365-674-2?
894365-674-2 is a GASKET.
What parts can replace 894365-674-2?
There is 1 known substitute for 894365-674-2: 894365-6741. Substitute compatibility should be verified for your specific system.
What is the NSN for 894365-674-2?
894365-674-2 is cataloged in the U.S. Government catalog under NSN 5330-01-480-0823. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 894365-674-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.