PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 893NC6086
893NC6086 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 6.250 INCHES NOMINAL IN, length: 5.000 INCHES NOMINAL IN, material: STEEL, body_thickness: 0.250 INCHES NOMINAL IN, peripheral_shape_style: RECTANGLE, EIGHT HOLES, cross-sectional_shape_style: FLAT W/OPEN CENTER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-171-6982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
893NC6086
NSN: 5340-01-171-6982
FSC: 5340
CAGE: 82328 — DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE (USA)
SPECIFICATIONS
width6.250 INCHES NOMINAL IN
length5.000 INCHES NOMINAL IN
materialSTEEL
body_thickness0.250 INCHES NOMINAL IN
peripheral_shape_styleRECTANGLE, EIGHT HOLES
cross-sectional_shape_styleFLAT W/OPEN CENTER
corner_hole_centerline_radius0.312 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length2.500 INCHES NOMINAL IN
distance_between_hole_centerline_and_first_hole_along_length2.125 INCHES NOMINAL IN
NSN5340-01-171-6982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 893NC6086 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: RECTANGLE, EIGHT HOLES
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH: 2.125 INCHES NOMINAL IN
•
CORNER HOLE CENTERLINE RADIUS: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 2.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT W/OPEN CENTER
•
LENGTH: 5.000 INCHES NOMINAL IN
•
WIDTH: 6.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLERECTANGLE, EIGHT HOLES
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH2.125 INCHES NOMINAL IN
CORNER HOLE CENTERLINE RADIUS0.312 INCHES NOMINAL IN
MATERIALSTEEL
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH2.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT W/OPEN CENTER
LENGTH5.000 INCHES NOMINAL IN
WIDTH6.250 INCHES NOMINAL IN
BODY THICKNESS0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
28-5005Interchangeable
interchangeable cross-reference
interchangeable
NAS561C2-8Interchangeable
interchangeable cross-reference
interchangeable
311-0421-000Interchangeable
interchangeable cross-reference
interchangeable
TP-2000Interchangeable
interchangeable cross-reference
interchangeable
263008Interchangeable
interchangeable cross-reference
interchangeable
757002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 893NC6086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 893NC6086?
893NC6086 is a COVER,ACCESS.
What parts can replace 893NC6086?
There are 7 known substitutes for 893NC6086: 28-5005, NAS561C2-8, 311-0421-000 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 893NC6086?
893NC6086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-171-6982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 893NC6086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026