PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8936418-01
8936418-01 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL, head_style: HEXAGON, grip_length: 4.312 INCHES NOMINAL IN, head_height: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-311-3448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8936418-01
NSN: 5306-01-311-3448
FSC: 5306
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
head_styleHEXAGON
grip_length4.312 INCHES NOMINAL IN
head_height0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM IN
thread_length0.422 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES GRIP
fastener_length4.718 INCHES MINIMUM AND 4.765 INCHES MAXIMUM IN
special_featuresSAFETY CRITICAL ITEM. APPLY ONE COAT OF MIL-P-23377, TY 1, CL 1 OR 3 AND TWO TOP COATS OF MIL-C-46168, COLOR CODE 33538 PER FED-STD-595 TO TOP OF HEAD
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5306-01-311-3448
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8936418-01 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.422 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.546 INCHES MINIMUM AND 4.578 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.422 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
SURFACE FINISH32.0 MICROINCHES GRIP
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER4.546 INCHES MINIMUM AND 4.578 INCHES MAXIMUM FIRST HOLE IN
SPECIAL FEATURESSAFETY CRITICAL ITEM. APPLY ONE COAT OF MIL-P-23377, TY 1, CL 1 OR 3 AND TWO TOP COATS OF MIL-C-46168, COLOR CODE 33538 PER FED-STD-595 TO TOP OF HEAD
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
MATERIALSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
CRITICALITY CODE JUSTIFICATIONFEAT
NOMINAL THREAD DIAMETER0.500 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
904291Interchangeable
interchangeable cross-reference
interchangeable
FF-W-92Interchangeable
interchangeable cross-reference
interchangeable
EE42417Interchangeable
interchangeable cross-reference
interchangeable
0255-2Interchangeable
interchangeable cross-reference
interchangeable
S-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8936418-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8936418-01?
8936418-01 is a BOLT,SHEAR.
What parts can replace 8936418-01?
There are 5 known substitutes for 8936418-01: 904291, FF-W-92, EE42417 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8936418-01?
8936418-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-311-3448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8936418-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026