PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 89303-6
89303-6 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: 0.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL PIPE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN, connection_style: PLAIN OPTIONAL END FIRST END, outside_diameter: 0.880 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-320-8230, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
89303-6
NSN: 4720-01-320-8230
FSC: 4720
CAGE: 24984 — HYDRAFLOW (USA)
SPECIFICATIONS
temp_rating0.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL PIPE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_stylePLAIN OPTIONAL END FIRST END
outside_diameter0.880 INCHES NOMINAL IN
special_featuresWEAPON SYSTEM ESSENTIAL
thread_directionRIGHT-HAND FIRST END
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure800.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-320-8230
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 89303-6 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FITTING COMPONENT AND SURFACE TREATMENT: NUT PASSIVATE FIRST END
•
BURST TEST PRESSURE: 800.0 POUNDS PER SQUARE INCH LBS
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER MOLDED RUBBER, ETHYLENE PROPYLENE AND 2ND LAYER BRAIDED RAYON CORD OR 2ND LAYER BRAIDED POLYESTER CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE
•
END FITTING COMPONENT AND MATERIAL: NUT STEEL CORROSION RESISTING ALL ENDS
•
CONNECTION TYPE: THREADED INTERNAL PIPE FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
FITTING COMPONENT AND SURFACE TREATMENTNUT PASSIVATE FIRST END
BURST TEST PRESSURE800.0 POUNDS PER SQUARE INCH LBS
INSIDE DIAMETER0.500 INCHES NOMINAL IN
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER MOLDED RUBBER, ETHYLENE PROPYLENE AND 2ND LAYER BRAIDED RAYON CORD OR 2ND LAYER BRAIDED POLYESTER CORD AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE
END FITTING COMPONENT AND MATERIALNUT STEEL CORROSION RESISTING ALL ENDS
CONNECTION TYPETHREADED INTERNAL PIPE FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
89303-12Interchangeable
interchangeable cross-reference
interchangeable
89303-012Interchangeable
interchangeable cross-reference
interchangeable
7265468Interchangeable
interchangeable cross-reference
interchangeable
89303-008Interchangeable
interchangeable cross-reference
interchangeable
5859793-4Interchangeable
interchangeable cross-reference
interchangeable
5859793-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 89303-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 89303-6?
89303-6 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 89303-6?
There are 23 known substitutes for 89303-6: 89303-12, 89303-012, 7265468 and 20 more. Substitute compatibility should be verified for your specific system.
Is 89303-6 still available?
89303-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 89303-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026