PartsTable
Technical Data Sheet
Download PDF

8926T33 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8926T33: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE, shank_length: 0.250 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, special_features: BUMPER 90 POUND LOAD MAX;THREAD SIZE 1/4 INCH-20 LBS, style_designator: NUT, end_item_identification: 87500150SA. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-611-6553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8926T33
NSN: 5340-01-611-6553
FSC: 5340 — Hardware, Commercial
CAGE: 07BY4 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialRUBBER SILICONE
shank_length0.250 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
special_featuresBUMPER 90 POUND LOAD MAX;THREAD SIZE 1/4 INCH-20 LBS
style_designatorNUT
end_item_identification87500150SA
outside/top_flange_diameter1.000 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyHARD SILICONE RUBBER
NSN5340-01-611-6553
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8926T33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 1.000 INCHES NOMINAL IN
•
SHANK LENGTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NUT
•
MATERIAL: RUBBER SILICONE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.000 INCHES NOMINAL IN
SHANK LENGTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORNUT
SPECIAL FEATURESBUMPER 90 POUND LOAD MAX;THREAD SIZE 1/4 INCH-20 LBS
PART NAME ASSIGNED BY CONTROLLING AGENCYHARD SILICONE RUBBER
END ITEM IDENTIFICATION87500150SA
MATERIALRUBBER SILICONE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8926T33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8926T33?
8926T33 is a BUMPER.
What is the NSN for 8926T33?
8926T33 is cataloged in the U.S. Government catalog under NSN 5340-01-611-6553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8926T33

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.