PartsTable
Technical Data Sheet
Download PDF

8909A700-168 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8909A700-168: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.250 INCHES NOMINAL IN, overall_length: 2.250 INCHES NOMINAL IN, aperture_diameter: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-397-8136, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8909A700-168
NSN: 5330-01-397-8136
FSC: 5330 — Packing and Gasket Materials
CAGE: 20722 — THE ENTWISTLE COMPANY LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.250 INCHES NOMINAL IN
overall_length2.250 INCHES NOMINAL IN
aperture_diameter0.500 INCHES NOMINAL IN
bolt_hole_quantity2
cross-sectional_thickness0.050 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-397-8136
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8909A700-168 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.050 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.500 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.050 INCHES NOMINAL IN
OVERALL LENGTH2.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.250 INCHES NOMINAL IN
APERTURE DIAMETER0.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.190 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
G-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8909A700-168?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8909A700-168?
8909A700-168 is a GASKET.
What parts can replace 8909A700-168?
There is 1 known substitute for 8909A700-168: G-75. Substitute compatibility should be verified for your specific system.
What is the NSN for 8909A700-168?
8909A700-168 is cataloged in the U.S. Government catalog under NSN 5330-01-397-8136. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8909A700-168

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.