PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 89-39-8
89-39-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,PIPE,MAGNETIC is a the manufacturer industrial component. Key specifications include material: ASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE, body_length: 0.780 INCHES NOMINAL IN, magnet_width: 0.688 INCHES NOMINAL IN, connection_style: PLAIN, style_designator: PLUG, MAGNETIC, thread_direction: RIGHT-HAND EXTERNAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-264-9599, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
89-39-8
NSN: 5330-00-264-9599
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE
body_length0.780 INCHES NOMINAL IN
magnet_width0.688 INCHES NOMINAL IN
connection_stylePLAIN
style_designatorPLUG, MAGNETIC
thread_directionRIGHT-HAND EXTERNAL
fabrication_methodTWISTED
nominal_thread_size1.250 INCHES EXTERNAL IN
lubrication_materialOIL
magnet_projection_length0.531 INCHES NOMINAL IN
thread_series_designatorNPTF EXTERNAL
cross-sectional_shape_styleCIRCULAR
NSN5330-00-264-9599
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 89-39-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS SECTION OUTSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND A GRADE
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-51, TYPE 3-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: OIL
•
FABRICATION METHOD: TWISTED
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS SECTION OUTSIDE DIAMETER0.188 INCHES NOMINAL IN
MATERIALASBESTOS CHRYSOTILE AND OIL LUBRICATING AND GRAPHITE
NONDEFINITIVE SPEC/STD DATA3 TYPE AND A GRADE
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-51, TYPE 3-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALOIL
FABRICATION METHODTWISTED
CROSS-SECTIONAL SHAPE STYLECIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
FV-21-554-DInterchangeable
interchangeable cross-reference
interchangeable
HHP51TYPE3GRADEAInterchangeable
interchangeable cross-reference
interchangeable
HHP51ANDTYPE3ANDGRADEAInterchangeable
interchangeable cross-reference
interchangeable
00-00-41688-0020Interchangeable
interchangeable cross-reference
interchangeable
1250R122Interchangeable
interchangeable cross-reference
interchangeable
500387Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 89-39-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 89-39-8?
89-39-8 is a PLUG,PIPE,MAGNETIC.
What parts can replace 89-39-8?
There are 10 known substitutes for 89-39-8: FV-21-554-D, HHP51TYPE3GRADEA, HHP51ANDTYPE3ANDGRADEA and 7 more. Substitute compatibility should be verified for your specific system.
Is 89-39-8 still available?
89-39-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 89-39-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026