PartsTable
Technical Data Sheet
Download PDF

89-36017 — NUT,CLIP-ON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

89-36017: NUT,CLIP-ON.

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1108 OVERALL, thread_class: 2B2B, overall_width: 0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM0.530 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HANDRIGHT-HAND, nominal_thread_size: 0.250 INCHES0.250 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-411-5820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
89-36017
NSN: 5310-01-411-5820
FSC: 5310 — Nuts and Washers
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialSTEEL COMP 1108 OVERALL
thread_class2B2B
overall_width0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM0.530 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HANDRIGHT-HAND
nominal_thread_size0.250 INCHES0.250 INCHES IN
thread_quantity_per_inch2020
NSN5310-01-411-5820
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 89-36017 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HANDRIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES0.250 INCHES IN
•
THREAD CLASS: 2B2B
•
THREAD QUANTITY PER INCH: 2020
•
MATERIAL: STEEL COMP 1108 OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
OVERALL WIDTH0.510 INCHES MINIMUM AND 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM0.530 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES0.250 INCHES IN
THREAD CLASS2B2B
THREAD QUANTITY PER INCH2020
MATERIALSTEEL COMP 1108 OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 89-36017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 89-36017?
89-36017 is a NUT,CLIP-ON.
What is the NSN for 89-36017?
89-36017 is cataloged in the U.S. Government catalog under NSN 5310-01-411-5820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 89-36017

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.