PartsTable
Technical Data Sheet
Download PDF

8898873 — LOCK,RIM

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8898873: LOCK,RIM.

The LOCK,RIM is a the manufacturer industrial component. Key specifications include material: STEEL CASE, bolt_type: UNIVERSAL, thickness: 2.000 INCHES MINIMUM MEMBER IN, design_type: DEAD BOLT, backset_depth: 0.156 INCHES NOMINAL IN, special_features: SPACING DIMENSION:1.000 IN.KNOB HUB CENTER TO CYLINDER CENTER;KEY CHANGE QTY:NONE;MASTER KEY PROVISION:NOT INCLUDED; IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-626-0356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8898873
NSN: 5340-00-626-0356
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CASE
bolt_typeUNIVERSAL
thickness2.000 INCHES MINIMUM MEMBER IN
design_typeDEAD BOLT
backset_depth0.156 INCHES NOMINAL IN
special_featuresSPACING DIMENSION:1.000 IN.KNOB HUB CENTER TO CYLINDER CENTER;KEY CHANGE QTY:NONE;MASTER KEY PROVISION:NOT INCLUDED; IN
locking_mechanism_typeSPRING TUMBLER
NSN5340-00-626-0356
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8898873 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING MECHANISM TYPE: SPRING TUMBLER
•
DESIGN TYPE: DEAD BOLT
•
BOLT TYPE: UNIVERSAL
•
MATERIAL: STEEL CASE
•
BACKSET DEPTH: 0.156 INCHES NOMINAL IN
•
THICKNESS: 2.000 INCHES MINIMUM MEMBER IN
TECHNICAL CHARACTERISTICS
LOCKING MECHANISM TYPESPRING TUMBLER
DESIGN TYPEDEAD BOLT
BOLT TYPEUNIVERSAL
SPECIAL FEATURESSPACING DIMENSION:1.000 IN.KNOB HUB CENTER TO CYLINDER CENTER;KEY CHANGE QTY:NONE;MASTER KEY PROVISION:NOT INCLUDED; IN
MATERIALSTEEL CASE
BACKSET DEPTH0.156 INCHES NOMINAL IN
THICKNESS2.000 INCHES MINIMUM MEMBER IN
SUBSTITUTES & CROSS-REFERENCES 1
15766AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8898873?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8898873?
8898873 is a LOCK,RIM.
What parts can replace 8898873?
There is 1 known substitute for 8898873: 15766A. Substitute compatibility should be verified for your specific system.
What is the NSN for 8898873?
8898873 is cataloged in the U.S. Government catalog under NSN 5340-00-626-0356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8898873

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.