PartsTable
Technical Data Sheet
Download PDF

88891761 — NUT,PLAIN,CONE SEAT,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

88891761: NUT,PLAIN,CONE SEAT,HEXAGON.

The NUT,PLAIN,CONE SEAT,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CONE SEAT, HEXAGON, nut_height: 0.688 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-032-6477, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88891761
NSN: 5310-01-032-6477
FSC: 5310 — Nuts and Washers
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCONE SEAT, HEXAGON
nut_height0.688 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats1.000 INCHES NOMINAL IN
nominal_thread_size0.625 INCHES IN
thread_quantity_per_inch18
NSN5310-01-032-6477
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 88891761 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.000 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT HEIGHT: 0.688 INCHES NOMINAL IN
•
NUT STYLE: CONE SEAT, HEXAGON
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.000 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT HEIGHT0.688 INCHES NOMINAL IN
NUT STYLECONE SEAT, HEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH18
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
341529Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 88891761?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88891761?
88891761 is a NUT,PLAIN,CONE SEAT,HEXAGON.
What parts can replace 88891761?
There is 1 known substitute for 88891761: 341529. Substitute compatibility should be verified for your specific system.
What is the NSN for 88891761?
88891761 is cataloged in the U.S. Government catalog under NSN 5310-01-032-6477. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88891761

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.