PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 887B050699
887B050699 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ROD END,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, flange_width: 0.060 INCHES NOMINAL IN, thread_class: 2A OVERALL A, thread_length: 0.725 INCHES NOMINAL ROD CONNECTION IN, overall_length: 1.673 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN, flange_diameter: 0.315 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-033-6778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
887B050699
NSN: 5340-01-033-6778
FSC: 5340
CAGE: 4N133 — CHATHAM PRECISION INC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
flange_width0.060 INCHES NOMINAL IN
thread_class2A OVERALL A
thread_length0.725 INCHES NOMINAL ROD CONNECTION IN
overall_length1.673 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN
flange_diameter0.315 INCHES MINIMUM IN
style_designatorEXTERNAL THREAD, FLANGED, SOLID END
thread_directionRIGHT-HAND OVERALL
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.938 INCHES ROD CONNECTION IN
unthreaded_end_length0.813 INCHES NOMINAL IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
NSN5340-01-033-6778
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 887B050699 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.060 INCHES NOMINAL IN
•
UNTHREADED END LENGTH: 0.813 INCHES NOMINAL IN
•
STYLE DESIGNATOR: EXTERNAL THREAD, FLANGED, SOLID END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
NOMINAL THREAD SIZE: 0.938 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE WIDTH0.060 INCHES NOMINAL IN
UNTHREADED END LENGTH0.813 INCHES NOMINAL IN
STYLE DESIGNATOREXTERNAL THREAD, FLANGED, SOLID END
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
NOMINAL THREAD SIZE0.938 INCHES ROD CONNECTION IN
UNTHREADED END OUTSIDE DIAMETER0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN
OVERALL LENGTH1.673 INCHES MINIMUM AND 1.703 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
B-13-MInterchangeable
interchangeable cross-reference
interchangeable
G606-MInterchangeable
interchangeable cross-reference
interchangeable
50699Interchangeable
interchangeable cross-reference
interchangeable
163747Interchangeable
interchangeable cross-reference
interchangeable
84025Interchangeable
interchangeable cross-reference
interchangeable
31456Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 887B050699?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 887B050699?
887B050699 is a ROD END,THREADED.
What parts can replace 887B050699?
There are 7 known substitutes for 887B050699: B-13-M, G606-M, 50699 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 887B050699?
887B050699 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-033-6778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 887B050699

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026