PartsTable
Technical Data Sheet
Download PDF

887AS328 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

887AS328: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, overall_length: 4.312 INCHES NOMINAL IN, handle_clearance: 1.188 INCHES NOMINAL IN, special_features: OFFSET LENGTH 0.875 IN. FROM GRIP EDGE,OFFSET ANGLE 0.500 IN.

MAX FROM HANDLE CENTER IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-114-0130, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
887AS328
NSN: 5340-01-114-0130
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
overall_length4.312 INCHES NOMINAL IN
handle_clearance1.188 INCHES NOMINAL IN
special_featuresOFFSET LENGTH 0.875 IN. FROM GRIP EDGE,OFFSET ANGLE 0.500 IN. MAX FROM HANDLE CENTER IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.000 INCHES NOMINAL IN
NSN5340-01-114-0130
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 887AS328 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.312 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.188 INCHES NOMINAL IN
SPECIAL FEATURESOFFSET LENGTH 0.875 IN. FROM GRIP EDGE,OFFSET ANGLE 0.500 IN. MAX FROM HANDLE CENTER IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
ABA 9-30Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
13221-A-1032-1BReference document
Same NSN cross-reference
Reference document — Secondary reference
391-015-9001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
ABA8-30Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 887AS328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 887AS328?
887AS328 is a HANDLE,BOW.
What parts can replace 887AS328?
There are 4 known substitutes for 887AS328: ABA 9-30, 13221-A-1032-1B, 391-015-9001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 887AS328?
887AS328 is cataloged in the U.S. Government catalog under NSN 5340-01-114-0130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 887AS328

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.