PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 88605
88605 ✓ Verified by PartsTable
InLine · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Fiber optical duplex cable, LC/ST 62.5/125µm. Key specifications include part_name_assigned_by_controlling_agency: RETAINING BANDS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
88605
NSN: 3110-00-156-3547
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyRETAINING BANDS
NSN3110-00-156-3547
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 88605 · InLine ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SEAL QUANTITY: 2
•
LUBRICATION MATERIAL: GREASE
•
INNER RING WIDTH: 0.9840 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BEARING SEAL TYPE: CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SEAL QUANTITY2
LUBRICATION MATERIALGREASE
INNER RING WIDTH0.9840 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
BEARING SEAL TYPECONTACT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
OUTER RING WIDTH0.6690 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
FF-B-171/36J05D2XInterchangeable
interchangeable cross-reference
interchangeable
700943Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171B SUPP 1Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/10J14C2XInterchangeable
interchangeable cross-reference
interchangeable
FF-B-171/10Interchangeable
interchangeable cross-reference
interchangeable
43614Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 88605?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88605?
88605 is a BEARING,BALL,ANNULAR manufactured by InLine.
What parts can replace 88605?
There are 20 known substitutes for 88605: FF-B-171/36J05D2X, 700943, FF-B-171B SUPP 1 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 88605?
88605 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88605

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026