PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 885C054308
885C054308 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.605 INCHES MINIMUM AND 1.645 INCHES MAXIMUM IN, overall_length: 1.605 INCHES MINIMUM AND 1.645 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-459-6038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
885C054308
NSN: 5330-01-459-6038
FSC: 5330
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.605 INCHES MINIMUM AND 1.645 INCHES MAXIMUM IN
overall_length1.605 INCHES MINIMUM AND 1.645 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
bolt_hole_quantity4
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-1149, TY1,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_width1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-459-6038
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 885C054308 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149, TY1,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
OVERALL LENGTH1.605 INCHES MINIMUM AND 1.645 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.605 INCHES MINIMUM AND 1.645 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149, TY1,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORNON-CIRCULAR
BOLT HOLE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
AN123990Interchangeable
interchangeable cross-reference
interchangeable
36008Interchangeable
Premium Services Plan f/ PX12R-350R, 1TB Kit, 3Y, 4h, 24x7
interchangeable
26513Interchangeable
interchangeable cross-reference
interchangeable
78321Interchangeable
interchangeable cross-reference
interchangeable
54308Interchangeable
interchangeable cross-reference
interchangeable
0705150Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 885C054308?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 885C054308?
885C054308 is a GASKET.
What parts can replace 885C054308?
There are 9 known substitutes for 885C054308: AN123990, 36008, 26513 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 885C054308?
885C054308 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-459-6038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 885C054308

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026