PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 885C054305
885C054305 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.292 INCHES MINIMUM AND 1.332 INCHES MAXIMUM IN, overall_length: 1.292 INCHES MINIMUM AND 1.332 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.105 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-459-6047, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
885C054305
NSN: 5330-01-459-6047
FSC: 5330
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.292 INCHES MINIMUM AND 1.332 INCHES MAXIMUM IN
overall_length1.292 INCHES MINIMUM AND 1.332 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.105 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN
bolt_hole_quantity4
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-1149, TY1,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_width0.950 INCHES MINIMUM AND 0.990 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length0.950 INCHES MINIMUM AND 0.990 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-459-6047
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 885C054305 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 4
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149, TY1,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.950 INCHES MINIMUM AND 0.990 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.105 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.950 INCHES MINIMUM AND 0.990 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY4
OVERALL WIDTH1.292 INCHES MINIMUM AND 1.332 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149, TY1,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.950 INCHES MINIMUM AND 0.990 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATORNON-CIRCULAR
APERTURE DIAMETER1.105 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.950 INCHES MINIMUM AND 0.990 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH1.292 INCHES MINIMUM AND 1.332 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
54305Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-60Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-60 TY2SEDST3Interchangeable
interchangeable cross-reference
interchangeable
TICS.17.10277Interchangeable
interchangeable cross-reference
interchangeable
409798303Interchangeable
interchangeable cross-reference
interchangeable
NDC00338-0049-03Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 885C054305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 885C054305?
885C054305 is a GASKET.
What parts can replace 885C054305?
There are 6 known substitutes for 885C054305: 54305, GGG-T-60, GGG-T-60 TY2SEDST3 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 885C054305?
885C054305 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-459-6047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 885C054305

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026