PartsTable
Technical Data Sheet
Download PDF

885A052990 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

885A052990: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT CHAMFER, head_height: 0.250 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.375 INCHES NOMINAL IN, thread_length: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-032-9114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
885A052990
NSN: 5305-01-032-9114
FSC: 5305 — Screws
CAGE: 34228 — L3 TECHNOLOGIES, INC. DIV L3 KEO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT CHAMFER
head_height0.250 INCHES NOMINAL IN
thread_class3A A
head_diameter0.375 INCHES NOMINAL IN
thread_length0.375 INCHES NOMINAL IN
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.250 INCHES IN
NSN5305-01-032-9114
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 885A052990 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.250 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.375 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
HEAD HEIGHT0.250 INCHES NOMINAL IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.375 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 2
887F050002 ITEM 5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
885B052990Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 885A052990?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 885A052990?
885A052990 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 885A052990?
There are 2 known substitutes for 885A052990: 887F050002 ITEM 5, 885B052990. Substitute compatibility should be verified for your specific system.
What is the NSN for 885A052990?
885A052990 is cataloged in the U.S. Government catalog under NSN 5305-01-032-9114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 885A052990

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.