PartsTable
Technical Data Sheet
88512 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Universal case for navigation systems (e.g. Navman N20, Viamichelin X.950, Becker Traffic High Speed 2, etc.)<br>- To protect against scratches, dirt and moisture<br>- Colour: black.<br>- Material: nylon. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-065-9487, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 88512
NSN: 3110-00-065-9487
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
shapeCYLINDRICAL
windowNOT INCLUDED
materialPLASTIC
bore_shapeSTRAIGHT
flow_styleTWO-WAY TWO PORT 90 DEGREE PLUG TURN
seat_angle37.5 DEGREES FIRST END
switch_typeROTARY
thread_class3A FIRST END A
bore_diameter60.00 MILLIMETERS NOMINAL MM
overall_width1.150 INCHES NOMINAL IN
seal_quantity2
inclosure_typeFULLY INCLOSED
NSN3110-00-065-9487
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 88512 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
BORE DIAMETER: 60.00 MILLIMETERS NOMINAL MM
SEAL QUANTITY: 2
SURFACE FINISH: GROUND
OUTER RING WIDTH: 25.00 MILLIMETERS NOMINAL MM
INNER RING WIDTH: 33.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
FEATURES PROVIDED: ALIGNING RING
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
SEAL QUANTITY2
SURFACE FINISHGROUND
OUTER RING WIDTH25.00 MILLIMETERS NOMINAL MM
INNER RING WIDTH33.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
FEATURES PROVIDEDALIGNING RING
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL OUTSIDE DIAMETER110.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
F10A250V5AInterchangeable
interchangeable cross-reference
interchangeable
88512Interchangeable
interchangeable cross-reference
interchangeable
M1N5Interchangeable
interchangeable cross-reference
interchangeable
GS839GW1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 88512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 88512?
88512 is a FUSE,CARTRIDGE manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 88512?
There are 4 known substitutes for 88512: F10A250V5A, 88512, M1N5 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 88512?
88512 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-065-9487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 88512