PartsTable
Technical Data Sheet
Download PDF

8845-113 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8845-113: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, overall_length: 96.000 INCHES NOMINAL IN, special_features: WITH ONE STIFFENING PLY OF DACRON FABRIC D2000, cross-sectional_width: 0.550 INCHES NOMINAL IN, cross-sectional_height: 0.500 INCHES NOMINAL IN, material_document_and_classification: MIL-R-25988,CLASS 1, GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-449-3747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8845-113
NSN: 5330-01-449-3747
FSC: 5330 — Packing and Gasket Materials
CAGE: 11960 — KIRKHILL TA HASKON DIV (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
overall_length96.000 INCHES NOMINAL IN
special_featuresWITH ONE STIFFENING PLY OF DACRON FABRIC D2000
cross-sectional_width0.550 INCHES NOMINAL IN
cross-sectional_height0.500 INCHES NOMINAL IN
material_document_and_classificationMIL-R-25988,CLASS 1, GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-449-3747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8845-113 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.550 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988,CLASS 1, GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.550 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988,CLASS 1, GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH96.000 INCHES NOMINAL IN
SPECIAL FEATURESWITH ONE STIFFENING PLY OF DACRON FABRIC D2000
MATERIALRUBBER FLUOROSILICONE CLASS FQ OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
DAA3150P354-113Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy 8845-113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8845-113?
8845-113 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 8845-113?
There is 1 known substitute for 8845-113: DAA3150P354-113. Substitute compatibility should be verified for your specific system.
What is the NSN for 8845-113?
8845-113 is cataloged in the U.S. Government catalog under NSN 5330-01-449-3747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8845-113