PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8843219
8843219 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GEAR AND SHAFT ASSEMBLY,BEVEL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q TUBE, body_style: STRAIGHT SHAPE, INTERNAL COUPLING, shell_type: SOLID, thread_class: 2B, overall_height: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, overall_length: 2.080 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-721-3106, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8843219
NSN: 5340-01-721-3106
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q TUBE
body_styleSTRAIGHT SHAPE, INTERNAL COUPLING
shell_typeSOLID
thread_class2B
overall_height0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
overall_length2.080 INCHES NOMINAL IN
shell_materialSTEEL CORROSION RESISTING
inside_diameter0.084 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
contact_materialMETAL ALL MATING ENDS SINGLE CONTACT GROUPING
outside_diameter0.216 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
overall_diameter0.810 INCHES NOMINAL IN
special_features3/4 INCH ID IN
NSN5340-01-721-3106
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8843219 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
8843219/PAGE 54 PN A3Interchangeable
interchangeable cross-reference
interchangeable
LOA037021-A3Interchangeable
interchangeable cross-reference
interchangeable
8843219Interchangeable
interchangeable cross-reference
interchangeable
581-8843219-110Interchangeable
interchangeable cross-reference
interchangeable
R6111401-110Interchangeable
interchangeable cross-reference
interchangeable
LOA037021-110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8843219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8843219?
8843219 is a GEAR AND SHAFT ASSEMBLY,BEVEL.
What parts can replace 8843219?
There are 22 known substitutes for 8843219: 8843219/PAGE 54 PN A3, LOA037021-A3, 8843219 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8843219?
8843219 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-721-3106. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8843219

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026